Availability: | |
---|---|
Quantity: | |
ERW stands for “electric resistance welded”. ERW Steel pipe and tubes are manufactured by rolling metal and then welding it longitudinally across its length. ERW pipes have a welded joint in their cross-section. It is manufactured from Strip/Coil and can be manufactured up to 24” OD. High-frequency Induction Welding Technology is used for ERW Pipes &Tubes up to 21 inches OD. ERW pipe cold formed from a ribbon of steel pulled through a series of rollers and formed into a tube which is fused through an electric charge. It is mainly used for low/ medium pressure applications such as the transportation of water /oil.
Common sizes for ERW Steel Pipe and tubes are made in a variety of lengths to over 100 feet. Surface finishes are available in bare and coated formats and processing can be handled on-site to customer specifications.
Standard | ASTM 5L, ASTM A53, ASTM A178, ASTM A500/501, ASTM A691, ASTM A252, ASTM A672, EN 10217 |
Steel Grade | API 5L: PSL1/PSL2 Gr.A, Gr.B, X42, X46, X52, X56, X60, X65, X70 |
Surface | Lightly oiled, Hot dip galvanized, Electro galvanized, Black, Bare, Varnish coating/Anti rust oil, Protective Coatings (Coal Tar Epoxy, Fusion Bond Epoxy, 3-layers PE) |
Out Diameter | 21.3-660mm |
Wall Thickness | 1.0-20mm |
Length | 3-12m, or according to customer’s requirement |
End | Plain End, Beveled End, Treaded |
ERW pipes have various applications like fencing, line pipe, scaffolding etc. ERW steel pipes are available in various diameters, wall thickness, finish and grades
Major applications
Water pipelines
Agriculture & irrigation (Water mains, industrial water pipe lines, plant piping, deep tube-wells & casing pipes, sewerage piping)
Gas pipe lines
LPG and other non-toxic gas lines